| The know-how used to develop
and manufacture rotary motors has been applied
by Baumüller to linear motors. If a
rotary permanent-field synchronous motor
is cut open lengthwise and unrolled in a
single plane, you obtain a linear motor
with a primary, made up of a lamination
stack and a copper winding, and a secondary
comprised of an iron core and permanent
magnets.
Linear direct drives offer the following
advantages over conventional solutions for
generating linear motions consisting of
a rotary motor and a mechanical power transmission
component:
|
- Much higher velocities
- Much higher acceleration
- Much higher positioning accuracy without
overshoot
- Direct force build-up
- Maintenance-free, backlash-free drive
- High static and dynamic stiffness under load
- Control loop stability due to optimal mass
matching
Baumüller linear drives
are the ideal solution for
|
Servo applications |
|
Logistic applications |
|
|
Synchronous
linear drive |
|
|
LSE1K, LSE 1K(W)
LSC5G |
|
LSE7G, LSE8G, LSE9G
|
|
|
Asynchronous
linear drive |
|
|
LAE6G, LAE7G |
|
LAE6G, LAE7G |
|
|
|
|
- Semiconductors industry
- Electronics industry
- Pick & place applications
- Printing industry
- Packaging industries
- Textile machinery industry
- Plastics industry
- Machine tools industry
- Component placement and production
engineering
- Automotive industry
- Wood industry
- Robotics
- Handling
- Medical equipment
|
|
- Fully automated parking systems
- Container terminals
- Material handling systems for heavy
goods (e.g. paper rolls)
- Extremely low-profile trolley traveling
winches for cranes
- Other material handling and feeding
systems
- Press feeders
- Door drives
- Low-cost drives
- Bell drives
|
LSE - servo applications
This motor series features high
continuous forces and extremely compact design.
Due to these properties the series is suitable
for applications in extremely confined spaces.
For applications with maximum continuous load
requirements this series is also available with
water cooling.
Common features of the LSE series:
- Modular system with various motor frame sizes
and lengths
- Forward feed forces up to 15,500 N and velocities
up to 600 m/min
- Various winding designs for all motor sizes
to ensure optimal velocity adjustment
- Carbon fiber lamination of the primary, optional
for the secondary
- Degree of protection IP65 for all motor components
- Protection of the motor winding against thermal
overload
due to integrated temperature sensors (temperature
detector and KTY84)
- Highly flexible, tension-relieved and shielded
power cable feed
- Positioning accuracy down to 5 µm
LSE power range:
| |
LSE1K
XXXX |
LSE1G
XXXX |
LSE1W
XXXX |
| Continous
forces FNenn: |
60
N upto 1000 N |
320
N upto 1650 N |
900
N upto 6000 N |
| Peak
forces
Fmax: |
300
N upto 6750 N |
1950
N upto 12450 N |
1950
N upto 12450 N |
| Velocities: |
upto
600 m/min |
upto
480 m/min |
upto
480 m/min |
| Voltage
(DC-Bus): |
540
V |
540
V |
540
V |
| Air
gap: |
0.6
mm |
1
mm |
1
mm |
Coreless linear motors in
LSC 5G series
The coreless linear motors from
Baumüller achieve maximum rates of current
and force rise so they are suited for highly dynamic
applications with maximum stiffness relative to
disturbing forces.
 |
Features of
the LSC series
- Modular system with various motor frame
sizes and lengths
- Carbon fiber lamination of the primary
- Various winding designs for all motor
sizes to ensure
optimal velocity adjustment
- Protection of the motor winding against
thermal overload
due to integrated temperature sensors
(KTY84)
- Secondary takes the form of a U-shaped
profile in standardized lengths, provided
with magnets on both sides
|
LSC power range:
| |
LSC5G 14XX |
| Continous
forces FNenn: |
65N
upto 515 N |
| Peak
forces Fmax: |
280
N upto 2300 N |
| Velocities: |
upto
600 m/min |
| Voltage (DC-Bus): |
540
V |
Linear motors
for standard drives and logistics application
|
|
Fully
automated parking system
|
|
|
Container
terminals 40ft - Hamburg
|
| 
|
Handling
systems
|
Complete linear axis
LSA
 |
The
Baumüller scope of products and
services is not merely limited to linear
motor components. On the contrary, Baumüller
offers the user a plug & play solution
with clearly defined interfaces that
can be immediately connected to his
machine, a very compactly and flexibly
designed complete linear axis, LSA,
essentially comprised of linear components,
guidance system, mechanical structure
and length measuring system.
|
LSA power range:
| |
|
LSA18
xx |
LSA22
xx |
LSA33
xx |
| Dimensions |
length |
upto 3000 mm |
| |
width |
180
mm |
220
mm |
330
mm |
| |
height |
75
mm |
80
mm |
100
mm |
| Drives |
|
LSE1K 06xx |
LSE1K 08xx
LSE1K 10xx |
LSE1K 13xx
LSE1K 16xx |
| Length measuring
system |
measuring principle |
magnetic/optical |
| |
positioning accuracy |
upto 5 µm |
| Guidance system |
THK |
Serie SSR |
| Safety functions |
|
safety shock absorber |
| Power chain |
IGUS |
|
LAE Linear drive - Asynchronous
applications
LAE power range:
| |
LAE6G
XXXX |
LAE7G
XXXX |
| Schub
FNenn: |
50
N bis 1000 N |
15
N bis 295 N |
| Schub
Fdauer: |
16
N bis 316 N |
5
N bis 93 N |
| Geschwindigkeiten: |
6
m/s |
3
m/s |
| Spannung
(DC-Bus): |
540
V |
540
V |
|
|
|
Supratrans
Project
Supratrans Website
|
